Q195冷轧板材轧制困难原因分析

针对部分Q195冷轧板材存在轧制困难的现象，进行了现场检验与分析。带状组织、混晶现象严重导致变形强化系数偏高是造成轧制困难的主要原因。     

Effect of carbon surface oxidation on platinum supported carbon particles on the performance of gas diffusion electrodes for the oxygen reduction reaction

The effect of carbon surface oxidation on platinum supported carbon particles (Pt/C) with nitric acid was investigated by cyclic voltammetry, electrochemical impedance spectroscopy, polarization experiments and chronoamperometry. Cyclic voltammograms, polarization curves and electrochemical impedance spectra showed that the treated catalyst had much larger active surface area and higher ionic conductivity than the untreated catalyst, and provided enhanced performance for oxygen reduction. The formation of acidic groups was examined by IR spectra. The Pt/C surface oxidation had a large effect on the performance of a gas diffusion electrode for oxygen reduction reaction.     

Swelling properties of chemically modified oil palm empty fruit bunch based polyurethane composites

In this study, the diffusion of various types of solvent in oil palm empty fruit bunch/polyurethane composites, produced from chemically modified empty fruit bunches, was investigated. The solubility parameters and polymer–solvent interaction parameters of the produced composites were determined. The void contents of the composites were also determined before swelling tests to eliminate the free solvent present in the system. From the results obtained, we found that the diffusion of the solvents was dependent on the compatible group available and the voids present in the system. The solubility parameters of the empty fruit bunch/polyurethane composites with different degrees of chemical modification were 11.6 and 11.7 (cal/cm^?3)^1/2. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Development of a predictive model for polymer/solvent diffusion coefficient calculations

A new calculation procedure for free‐volume parameters is considered in this work by using viscosity prediction methods and the Levenberg‐Marquardt calculation scheme. All parameters used in the Vrentas–Duda free‐volume theory can be estimated from pure component properties. The prediction results are compared with experimental data for some polymer/solvent systems. The diffusion coefficient calculated by Vrentas–Duda theory can be used in the modeling of membrane separation processes. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Water and salt permeability of reinforcement polymer‐gel composite membrane

The charged mosaic polymer membrane (CMM) without reinforcement and the composite charged mosaic polymer membrane (CCMM) with reinforcement were investigated in terms of salt and water transport (permeability). The composite charged mosaic polymer membrane (CCMM) with reinforcement showed a unique transport behavior such as preferential material transport L_p and ω. Water permeability coefficient, L_p and salt permeability coefficient, ω were estimated by taking account of active layer thickness of composite polymer gel. The L_p and ω values of CCMM with reinforcement were larger than those of CMM without reinforcement. On the other hand, the reflection coefficient of CCMM, σ, showed negative value, which suggested preferential material transport to solvent transport. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Water absorption properties of phosphate glass fiber‐reinforced poly‐ϵ‐caprolactone composites for craniofacial bone repair

The moisture uptake of polymers and composites has increasing significance where these materials are specified for invasive, long‐term medical applications. Here we analyze mass gain and the ensuing degradation mechanisms in phosphate glass fiber reinforced poly‐?‐caprolactone laminates. Specimens were manufactured using in situ polymerization of ?‐caprolactone around a bed of phosphate glass fibers. The latter were sized with 3‐aminopropyltriethoxysilane to control the rate of modulus degradation. Fiber content was the main variable in the study, and it was found that the moisture diffusion coefficient increased significantly with increasing fiber volume fraction. Diffusion, plasticization, and leaching of constituents appear to be the dominant aspects of the process over these short‐term tests. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

USL和USK系列振动筛防噪技术分析

为了改善筛分机械的使用环境，降低筛分机械的噪声，从噪声源入手，从内因和外因两个方面分析了筛分机噪声的形成原因。论述了USL和USK系列振动筛在降低噪声方面所采取的先进技术措施。     

基于基尼系数的Web社区稳定性度量

Web社区是互联网中自组织程度较高的部分,它不是一个孤立系统,而是一个耗散系统,很多时候涨落无法耗散摔,导致社区运行不稳定.基尼系数可以用来衡量Web社区稳定性,通过基尼系数的简易计算公式计算社区内部成员积分或者其它参数,可以得出Web社区稳定性的度量.该度量对于研究和利用Web社区具有重要参考意义.     

Multiplicative Operator Splittings in Nonlinear Diffusion: From Spatial Splitting to Multiple Timesteps

Operator splitting is a powerful concept used in many diversed fields of applied mathematics for the design of effective numerical schemes. Following the success of the additive operator splitting (AOS) in performing an efficient nonlinear diffusion filtering on digital images, we analyze the possibility of using multiplicative operator splittings to process images from different perspectives.We start by examining the potential of using fractional step methods to design a multiplicative operator splitting as an alternative to AOS schemes. By means of a Strang splitting, we attempt to use numerical schemes that are known to be more accurate in linear diffusion processes and apply them on images. Initially we implement the Crank-Nicolson and DuFort-Frankel schemes to diffuse noisy signals in one dimension and devise a simple extrapolation that enables the Crank-Nicolson to be used with high accuracy on these signals. We then combine the Crank-Nicolson in 1D with various multiplicative operator splittings to process images. Based on these ideas we obtain some interesting results. However, from the practical standpoint, due to the computational expenses associated with these schemes and the questionable benefits in applying them to perform nonlinear diffusion filtering when using long timesteps, we conclude that AOS schemes are simple and efficient compared to these alternatives.We then examine the potential utility of using multiple timestep methods combined with AOS schemes, as means to expedite the diffusion process. These methods were developed for molecular dynamics applications and are used efficiently in biomolecular simulations. The idea is to split the forces exerted on atoms into different classes according to their behavior in time, and assign longer timesteps to nonlocal, slowly-varying forces such as the Coulomb and van der Waals interactions, whereas the local forces like bond and angle are treated with smaller timesteps. Multiple timestep integrators can be derived from the Trotter factorization, a decomposition that bears a strong resemblance to a Strang splitting. Both formulations decompose the time propagator into trilateral products to construct multiplicative operator splittings which are second order in time, with the possibility of extending the factorization to higher order expansions. While a Strang splitting is a decomposition across spatial dimensions, where each dimension is subsequently treated with a fractional step, the multiple timestep method is a decomposition across scales. Thus, multiple timestep methods are a realization of the multiplicative operator splitting idea. For certain nonlinear diffusion coefficients with favorable properties, we show that a simple multiple timestep method can improve the diffusion process.     

土体中毛细水压力的研究

该文从毛细水产生负孔隙水压力概念入手 ,对较难确定的孔隙水压力系数以及较抽象的地下连续墙时效稳定分析等问题进行了定量计算 ,以期对工程实践有一定的指导作用